Paper Title
M1 Opening Session
M1-1 Keynote
Microwave Acoustic Wave Devices -Journey Through the Past to the Future
Amelie Hagelauer (Fraunhofer EMFT & TU Munich)
M2 BAW components I
M2-1 Invited talk
Polarization Inverted ScAlN Multilayer BAW Resonators (invited)
Takahiko Yanagitani (Waseda University, Japan)
M2-2 Laterally Excited Bulk Acoustic Resonators With Convex Interdigital Electrodes Towards SHF Applications
Zhiwei Wen (Wuhan University, China) et al.
M2-3 Double Mode Type BAW(DMB) Filter Based on ScAlN Multilayers SMR Using Polarization-Inversion or Intermediate-Electrodes
Momoka Matsumura (Waseda University, Japan) et al.
M2-4 Ferroelectric Hysteresis Properties of Non-Doped AlN SMR
Ayaka Hanai (University of Waseda & ZAIKEN, Japan) et al.
M2-5 Invited talk
Demonstration of 8-Inch Thin-Film Sc0.3Al0.7N BAW Resonator With High Electromechanical Coupling Coefficient
You Qian (Institute of Microelectronics, A*STAR, Singapore et al.
M3 BAW components II
M3-1 Invited talk
On the Design of High Overtone BAW Resonators With Enhanced Power Handling
Ventsislav Yantchev (Q-Arts Consulting Ltd., Bulgaria & Huawei Technologies Oy, Finland) et al.
M3-2 Neural Network Assisted 3D FBAR Modeling With Random Electrode Shapes
Xi He (Shanghai University, China); Xing Haw Marvin Tan (Agency for Science Technology and Research, Singapore) et al.
M3-3 Wide-Band and High-Rejection RF Filters for 5G Applications Using BAW-On-Insulator Technology
Ji Liang (Shenzhen Newsonic Technologies Co. Ltd, China) et al.
M3-4 SMR With Epitaxial Top and Bottom Metal Acoustic Bragg Reflectors as Thick Electrodes
Misaki Tomioka (Waseda University, Japan) et al.
M3-5 Invited talk
Nonlinear Distortion and Its Analysis on Radio Frequency Thin Film Bulk Acoustic Devices
Masanori Ueda (TAIYO YUDEN CO LTD, Japan) et al.
M4 MEMS Resonators
M4-1 Phononic Crystal for Enhancement of MEMS Resonator Quality Factor
Mohammed Awad Ahmed Mohammed (University of Electronic Science and Technology of China, China) et al.
M4-2 Multi-Stage Frames for Q-Enhancement in Piezoelectric MEMS Resonators
Shuxian Wu (Fudan University, China) et al.
M4-5 A Lamb Wave Resonator With Trapezoidal Interdigitated Electrodes
Xiang Chen (Wuhan University, China) et al.
M4-4 Analysis of Plate Acoustic Waves Resonance Properties Using Thin Plate of LiNbO3/SiC
Noriyuki Watanabe (University of Yamanashi, Japan) et al.
M4-5 Development of Directly Bonded LiNbO3 Plates and Microfabricated Quartz Crystal Structures
Ko-hei Sano (Waseda University & AGC Inc., Japan) et al.
M3-5 Horizontal Harmonics Mitigation in Thickness Shear A1 Mode Resonators
Temesgen Bailie Workie (University of Electronic Science and Technology of China & Tiantong Ruihong Technology Co Ltd, China) et al.
Paper Title
T1 SAW Components and Modelling
T1-1 Invited talk
High-Performance Wideband SAW Filters on LNOI Platform
Weibiao Wang (SHOULDER Electronics Limited, China) et al.
T1-2 A Precise COM Model Parameter Extraction Method With Automated Curve-Fitting and Accuracy Verification
Kuanmao Xu (Suzhou Shengxin Electronic Tech Ltd, China) et al.
T1-3 The Design of SAW Filters With CNN Modeling and Cuckoo Search (CS) Optimization
Xuanying Hou (The Institute of Electromagnetics and Acoustics, China)
T1-4 Near 6-GHz Longitudinal Leaky SAW Filters With Spurious Mitigation on LiNbO3/SiO2/SiC Platform
Peisen Liu (Tsinghua University, China) et al.
T1-5 Invited talk
Wideband Longitudinal Leaky SAW Filter Implementation for Wi-Fi 7
Mijing Sun (School of Microelectronics, University of Science and Technology of China, China) et al.
T2 Poster Session
T3 SAW Components I
T3-1 Invited talk
Multiplexer Design to Minimize Gamma Loading to Higher Frequency Filters
Yiliu Wang (Skyworks Solutions, Inc., USA) et al.
T3-2 Synthesis of Wideband Filters Based on Acoustic Wave Transversal and Ladder Topologies
Santi Cano (Universitat Autònoma de Barcelona (UAB), Spain) et al.
T3-3 Observation of Nonlinearity Induced by Transverse Modes in SAW Devices Based on 36ºYX-LiTaO3/SiO2/SiC Structure
Baichuan Li (Southeast University, China) et al.
T3-4 Enhanced Electromechanical Coupling Near the Phase Boundary in Wurtzite (Mg, Zn)O and (Sc, Al)N
Junjun Jia (Waseda University, Japan) et al.
T3-5 Invited talk
SAW Filters Based on Composite Structure
Xiaobing Chen (Huayuan Micro Electronic Technology Co., China)
T4 Exhibitor Session
Paper Title
W1 SAW Components II
W1-1 Invited talk
Imaging GHz Surface Acoustic Waves on a Phononic Crystal Island
Oliver B. Wright (Osaka University & Hokkaido University, Japan) et al.
W1-2 Thin-Film Lithium Niobate on Insulator Surface Acoustic Wave Devices for 6G Centimeter Bands
Tzu-Hsuan Hsu (The University of Texas at Austin, USA) et al.
W1-3 Study on Loss Mechanisms in I.H.P. SAW Assisted by Full-3D Hierarchical Cascading Technique Yiming Liu (University of Electronic Science and Technology of China, China) et al.
W1-4 POI Wafers for Sub-GHz Bandpass SAW Filters
Sylvain J Ballandras (SOITEC SA, France) et al.
W1-5 Invited talk
Frequency Hysteresis Compensation of a Miniature OCXO Using Resonator Temperature Output for Extending Holdover Performance Wan-Lin Hsieh (TXC Corporation, Taiwan) et al.
W2 Poster Session
W3 SAW Components III
W3-1 Influence of the Tilted IDT on Nonlinear Harmonic Signals in SAW Resonators on LiNbO3/SiO2/Si Structure
Guangyao Lv (Shanghai Normal University, China) et al.
W3-2 Transverse Mode Suppression for Low Velocity SAW Resonator on Al/Pt/Low-Cut LT/Quartz Structure
Hu Richeng (University of Electronic Science and Technology of China, China) et al.
W3-3 Use of Dielectric Stripes for Transverse Mode Suppression for Surface Acoustic Wave Resonators
Fangyi Li (University of Electronic Science and Technology of China, China) et al.
W3-4 Transverse Mode Suppression for S0-Like SAW Mode Resonator
Li Xinzhi (University of Electronic Science and Technology of China, China) et al.
W4 Closing Session
W4-1 Keynote
Evolution of SAW and BAW Devices Using Thin LiTaO3 and LiNbO3
Shuji Tanaka (Tohoku University, Japan) et al.